First of all, the door opens: turn the handle on the door lock, the double door opens the right door first, and when the CAM reaches a larger stroke, you can force the door to open.
2. When loading and unloading goods, the door hook and hook seat on the side of the carriage are firmly fastened to prevent the free rotation of the door from affecting the work.
3. The position of the light switch in the compartment is in the left rear corner under the floor outside the car. Lighting must be turned off after loading and unloading.
4. The emergency alarm switch in the cabin is set on the right rear. If someone is locked in the carriage, you can press the alarm switch to alarm.
5. The loading and unloading of goods should be handled lightly, it is strictly prohibited to savage operation, and the goods should be placed smoothly to prevent damage to the evaporator of the van or refrigeration unit.
6. When the refrigerated truck is loaded, there should be a certain gap between the goods and the compartment wall to ensure the circulation of cold air, and the height of the goods should not exceed the limit line.
7. After loading and unloading, the door must be closed tightly, and the locking CAM mechanism must be in place to clamp and lock. Close the left door first.
8. The car body is connected to the frame by screws and pressure plates. Check whether the screws of the pressure plate are loose before each trip to prevent accidents caused by car body displacement.
9. The compressor of the split refrigeration unit is driven by the automobile engine. Check its working state before each trip (such as loosening the connection screw, belt tensioning, etc.) to ensure the normal operation of the unit.