Concrete mixer trucks are specialized equipment for transporting ready-mixed concrete. Users must load them reasonably based on the specific gravity of building materials such as concrete and mortar to meet the requirements of industry standards for transport vehicles. This article lists the working conditions of concrete mixer trucks and relevant safety regulations.

one Operator requirements: 1. Relevant personnel must undergo training before taking up their posts. 2. It is strictly prohibited to work while fatigued, after drinking alcohol or after taking drugs that affect one's mental state. 3. Operators must hold the driver's license required for driving a mixer truck and take proper safety precautions during operation. 4. One should be familiar with the relevant equipment operation safety regulations and operate in accordance with them.
Ii. Construction Conditions Requirements: 1. The altitude of the entire machine's construction site should not exceed 2000m, and the working environment temperature should be between 0 and 40℃. If it exceeds this range, it should be treated as a special case. 2. When working, it should be carried out on a flat and solid road surface. Construction is strictly prohibited on slippery, steeply inclined or loose soil ground. 3. Sufficient lighting conditions are required for night construction. 4. All hydraulic and electrical components as well as all vulnerable parts and consumables must be used under the working conditions of each component to ensure the effectiveness of the functions of each component.
Iii. Safety Operation Requirements n1. The loading mass must not exceed the maximum loading mass permitted by relevant laws and regulations. Before driving, make sure that all locking, fixing and clamping devices are in the locked state. 3. During transportation, the operating handle of the mixing drum should be in the stirring position and locked. Under normal circumstances, the transportation time shall not exceed 1 hour when the ambient temperature exceeds 25℃, and shall not exceed 1.5 hours when the ambient temperature is below 25℃. 5. When discharging materials, the discharge port must not face people directly to prevent injury from the impact of the sprayed concrete. 6. The pressure of the pneumatic water supply system must not be adjusted at will. 7. The bolt connections related to vehicles should be inspected and tightened regularly. Check and tighten them after one to two weeks of use for new vehicles.