In order to give full play to the vehicle performance in the future operation of compressed garbage trucks, we share some videos on vehicle operation and product maintenance instructions, so that users can quickly and comprehensively master the vehicle operation and maintenance skills.
"Seven points by quality, three points by maintenance", good equipment management and maintenance is the key to reduce the failure rate of equipment. Only regular maintenance of the vehicle (top and chassis) can ensure that it is always in good running condition, please be sure to strictly follow the vehicle maintenance procedures.

1, the hinged parts must be filled with butter every week
Function: Avoid shaft and sleeve stuck, slow down shaft and sleeve wear
2. After unloading the garbage, clean the sealing strip of the filler, the sink and the sewage tank
Function: Avoid the effect of garbage adhesion on sealing performance.
3. From time to time, clean up the residual garbage on the sliding way, the back of the pushing shovel, the piston rod of each cylinder and the cylinder head
Function: Avoid the difficulty of shovel operation due to garbage stuck, small garbage into the cylinder and damage the cylinder seal.
4, irregularly check whether the oil pipe joint is loose oil leakage, whether the oil pipe skin is scratched and worn, and whether the nut of the horse bolt fixing the garbage box is loose
Function: Reduce oil leakage and avoid body displacement.
5. If there is water in the oil-water separator, it should be drained in time
Function: Avoid water and oil entering the gas path to affect the use.
6, the skateboard slider wear more than 10mm need to be replaced in time
Function: Avoid the effect of rocking the slider due to wear and tear.
7, the new car must replace the hydraulic oil after three months, and replace it every six months in the later period. Pay attention to cleaning the oil filter element and the oil filter element of the oil tank
Function: Reduce the attenuation and damage of hydraulic component performance caused by impurities generated after a period of oil use.
Maintenance Tips:
Different grades of hydraulic oil can not be mixed, otherwise the performance of the power unit will be affected, the new box is used for 3 months, please replace the hydraulic oil in time, after every half a year, please replace the hydraulic oil in time, and add grease to the rotating shaft every week.